ELIANT 820 (EXTERNAL) Tape drive card Settings and Configuration

Device Type	Tape Drive
Interface	SCSI
Format	DDS
Sustained Transfer Rate	1MBPS (compression disabled) / 2MBPS (compression enabled)
Size	5.25 in. half height
View	Top

CONNECTIONS
Function	Label
Monitor connector (exact function unidentified)	CN1

DRIVE SELECT ID

Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window.

MANUFACTURERS RECOMMENDED MEDIA
Tape	Capacity Without Compression	Capacity With Compression
EXATAPE 8mm 160mXL	7.0GB	14.0GB

DIAGNOSTIC LED(S)
LED1 (Amber)	LED2 (Green)	LED3 (Green)	Condition
On	On	On	Power-on self-test
Fast flash	Irregular flash	Off	Power-on self-test failure
Off	Irregular flash	Off	Drive ready (no tape loaded)
Off	Irregular flash	On	Drive ready (tape loaded)
Off	Irregular flash	Slow flash	Normal tape motion
Off	Irregular flash	Fast flash	High speed tape motion
On	Irregular flash	On	SCSI bus reset
Slow flash	N/A	Off	Drive error
Fast flash	N/A	Fast flash	Cleaning required
Off	Irregular flash	Slow flash	Cleaning in progress

DIAGNOSTIC LED(S) CONTINUED
LED	Color	Status	Condition
LED4	Unidentified	On	Power to drive enabled
LED4	Unidentified	Off	Power to drive disabled

MISCELLANEOUS TECHNICAL NOTES

Exact location of terminating resistors is unidentified.