EXB-8205, EXB-8505, EXB-8205XLI Tape drive card Settings and Configuration

EXABYTE CORPORATION

EXB-8205, EXB-8505, EXB-8205XLI

EXB-8505XLI

Device Type
Internal Tape Drive
Interface
SCSI-2
Format
EXATAPE 8mm
Sustained Transfer Rate
500 KBPS
1 MBPS (compressed - EXB-8205XLI, and EXB-8505XLI only)
Size
5.25 in. half height
View
Top

CONNECTIONS
Function
Label
Function
Label
Ground connector
CN1
Unidentified
CN2

USER CONFIGURABLE SETTINGS
Setting
Label
Position
»
Factory configured - do not alter
JP2
Unidentified

DRIVE SELECT ID
Drive ID
JP1/Pins 1 & 2
JP1/Pins 3 & 4
JP5/Pins 5 & 6

0
Open
Open
Open

1
Closed
Open
Open
»
2
Open
Closed
Open

3
Closed
Closed
Open

4
Open
Open
Closed

5
Closed
Open
Closed

6
Open
Closed
Closed

7
Closed
Closed
Closed

MANUFACTURERS RECOMMENDED MEDIA
Drive
Tape
Capacity Without Compression
Capacity With Compression
EXB-8205
EXATAPE MP 15m
Unidentified
0.6GB
EXB-8205
EXATAPE MP 54m
Unidentified
2.3GB
EXB-8205
EXATAPE MP 112m
Unidentified
5.0GB
EXB-8505
EXATAPE MP 15m
Unidentified
1.2GB
EXB-8505
EXATAPE MP 54m
Unidentified
4.7GB
EXB-8505
EXATAPE MP 112m
Unidentified
10.0GB
EXB-8205XLI
EXATAPE MP 15m
Unidentified
0.6GB
EXB-8205XLI
EXATAPE MP 54m
Unidentified
2.3GB
EXB-8205XLI
EXATAPE MP 112m
Unidentified
5.0GB
EXB-8205XLI
EXATAPE MP 160m XL
3.5GB
7.0GB
EXB-8505XLI
EXATAPE MP 15m
Unidentified
1.2GB
EXB-8505XLI
EXATAPE MP 54m
Unidentified
4.7GB
EXB-8505XLI
EXATAPE MP 112m
Unidentified
10.0GB
EXB-8505XLI
EXATAPE MP 160m XL
7.0GB
14.0GB
Note: "MP" refers to "metal particle". "XL" refers to "extended length".

DIAGNOSTIC LED(S)
LED1
(Orange)
LED2
(Grn/Org)
LED3
(Green)
Condition
On
On
On
Power-on self-test start.
On
Flash 1
Off
Power-on self-test end.
Flash 2
Flash 1
Off
Power-on self-test failure.
Off
Flash 1
Off
Ready - no tape.
Off
Flash 1
On
Ready - tape.
Off
Flash 1
Flash 3
Normal tape motion.
Off
Flash 1
Flash 2
High-speed tape motion.
On
Flash 1
On
SCSI bus reset.
Flash 3
Flash 1
Off
Drive error.
Flash 2
Flash 1
Flash 2
Cleaning required.
Note: Flash 1 refers to an irregular flash rate and varies with SCSI bus activity. The LED is off if the drive is not attached to the bus. Flash 2 refers to a fast flash rate at 4 flashes per second. Flash 3 refers to a slow flash rate at 1 flash per second.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

EXB-8205, EXB-8505, EXB-8205XLI Tape drive card Settings and Configuration

Search

My Books

Discover

Device Type	Internal Tape Drive
Interface	SCSI-2
Format	EXATAPE 8mm
Sustained Transfer Rate	500 KBPS 1 MBPS (compressed - EXB-8205XLI, and EXB-8505XLI only)
Size	5.25 in. half height
View	Top

CONNECTIONS
Function	Label	Function	Label
Ground connector	CN1	Unidentified	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP2	Unidentified

DRIVE SELECT ID
Drive ID		JP1/Pins 1 & 2	JP1/Pins 3 & 4	JP5/Pins 5 & 6
	0	Open	Open	Open
	1	Closed	Open	Open
»	2	Open	Closed	Open
	3	Closed	Closed	Open
	4	Open	Open	Closed
	5	Closed	Open	Closed
	6	Open	Closed	Closed
	7	Closed	Closed	Closed

MANUFACTURERS RECOMMENDED MEDIA
Drive	Tape	Capacity Without Compression	Capacity With Compression
EXB-8205	EXATAPE MP 15m	Unidentified	0.6GB
EXB-8205	EXATAPE MP 54m	Unidentified	2.3GB
EXB-8205	EXATAPE MP 112m	Unidentified	5.0GB
EXB-8505	EXATAPE MP 15m	Unidentified	1.2GB
EXB-8505	EXATAPE MP 54m	Unidentified	4.7GB
EXB-8505	EXATAPE MP 112m	Unidentified	10.0GB
EXB-8205XLI	EXATAPE MP 15m	Unidentified	0.6GB
EXB-8205XLI	EXATAPE MP 54m	Unidentified	2.3GB
EXB-8205XLI	EXATAPE MP 112m	Unidentified	5.0GB
EXB-8205XLI	EXATAPE MP 160m XL	3.5GB	7.0GB
EXB-8505XLI	EXATAPE MP 15m	Unidentified	1.2GB
EXB-8505XLI	EXATAPE MP 54m	Unidentified	4.7GB
EXB-8505XLI	EXATAPE MP 112m	Unidentified	10.0GB
EXB-8505XLI	EXATAPE MP 160m XL	7.0GB	14.0GB
Note: "MP" refers to "metal particle". "XL" refers to "extended length".

DIAGNOSTIC LED(S)
LED1 (Orange)	LED2 (Grn/Org)	LED3 (Green)	Condition
On	On	On	Power-on self-test start.
On	Flash 1	Off	Power-on self-test end.
Flash 2	Flash 1	Off	Power-on self-test failure.
Off	Flash 1	Off	Ready - no tape.
Off	Flash 1	On	Ready - tape.
Off	Flash 1	Flash 3	Normal tape motion.
Off	Flash 1	Flash 2	High-speed tape motion.
On	Flash 1	On	SCSI bus reset.
Flash 3	Flash 1	Off	Drive error.
Flash 2	Flash 1	Flash 2	Cleaning required.
Note: Flash 1 refers to an irregular flash rate and varies with SCSI bus activity. The LED is off if the drive is not attached to the bus. Flash 2 refers to a fast flash rate at 4 flashes per second. Flash 3 refers to a slow flash rate at 1 flash per second.