EXB-4200, EXB-4200C Tape drive card Settings and Configuration

Device Type	Tape Drive
Interface	SCSI, SCSI-2
Format	DDS-1 DDS-DC (EXB-4200C only)
Sustained Transfer Rate	234KBPS 467KBPS (EXB-4200C compressed only)
Size	3.5 in. half height
View	Top

CONNECTIONS
Function	Label	Function	Label
Ground connector	CN1	Monitor port (pin-out unidentified)	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	SCSI-1 Mode enabled	JP1/Pins 7 & 8	Closed
	SCSI-2 Mode enabled	JP1/Pins 7 & 8	Open

DRIVE SELECT ID
Drive ID	JP1/Pins 1 & 2	JP1/Pins 3 & 4	JP1/Pins 5 & 6
0	Open	Open	Open
1	Closed	Open	Open
2	Open	Closed	Open
3	Closed	Closed	Open
4	Open	Open	Closed
5	Closed	Open	Closed
6	Open	Closed	Closed
7	Closed	Closed	Closed

MANUFACTURERS RECOMMENED MEDIA
Drive	Tape	Capacity Without Compression	Capacity With Compression
EXB-4200	EXATAPE® 90 meter DDS-1	2.0GB	N/A
EXB-4200C	EXATAPE® 90 meter DDS-1	2.0GB	N/A
EXB-4200C	EXATAPE® 90 meter DDS-DC	2.0GB	4.0GB

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Drive power on
LED1	Green	Off	Drive power off
LED2	Orange	On	Data commands being processed
LED2	Orange	Off	Data commands not being processed
LED3	Yellow	On	Drive requires cleaning
LED3	Yellow	Off	Drive does not require cleaning
Note: When all LEDs are blinking, drive error has occurred. Power drive off, then on again. If LEDs continue to flash technical support is required.