LAN10E-MPC Network Card Settings and Configuration
ZENITH DATA SYSTEMS
LAN10E-MPC
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 8-bit ISA |
Topology | Star Linear Bus |
Wiring Type | Shielded/Unshielded twisted pair AUI transceiver via DB-15 port RG--58A/U 50ohm coaxial |
Boot ROM | Available |
BASE MEMORY ADDRESS | |
Address | JP1 |
CC00h | Pins 1 & 2 Closed |
D000h | Pins 2 & 3 Closed |
INTERRUPT REQUEST | |
IRQ | JP2 |
5 | Pins 1 & 2 Closed |
10 | Pins 2 & 3 Closed |
BOOT ROM | ||
Setting | JP3 | |
| » | Disabled | Pins 2 & 3 Closed |
Enabled at address D8000h | Pins 1 & 2 Closed | |
CABLE TYPE | |
Type | JP4A - JP4F |
Shielded/Unshielded twisted pair | Pins 1 & 2 Closed |
RG--58A/U 50ohm or AUI transceiver via DB-15 port | Pins 2 & 3 Closed |
SIGNAL QUALITY | ||
Setting | JP8 | |
| » | SQE test disabled | Pins 2 & 3 Closed |
SQE test enabled | Pins 1 & 2 Closed | |
My Books
