ETHER-TT Network Card Settings and Configuration

Card Type	Ethernet Transceiver
NIC Type	Ethernet
Network Transfer Rate	10Mbps
Topology	Linear Bus, Star
Wiring Type	Unshielded Twisted Pair AUI transceiver via DB-15 port
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15	CN1	RJ-45 UTP connector	CN2

USER CONFIGURABLE SETTINGS
Function	Label	Position
SQE collision detection enabled	SW1	On
SQE collision detection disabled	SW1	Off

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
JAB	Yellow	On	Abnormal frame rate detected
JAB	Yellow	Off	Frame rate is normal
COL	Yellow	On	Collision detected on network
COL	Yellow	Off	No collision detected on network
LINK/RX	Green	On	UTP link detected
LINK/RX	Green	Blinking	Data is being received
LINK/RX	Green	Off	UTP link not detected/Data is not being received
PWR/TX	Green	On	Power on
PWR/TX	Green	Blinking	Data is being transmitted
PWR/TX	Green	Off	Power off/Data is not being transmitted