TE-100/PCI+ Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	Ethernet
Boot ROM	Available
Network Transfer Rate	10Mbps/100Mbps
Topology	Star
Wire Type	Unshielded twisted pair
Data Bus	32-bit PCI
Card Size	Half height, half length

CONNECTIONS
Function	Label
RJ-45 UTP connector	CN1

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	Network connected to 100Mbps port
LED1	Green	Off	Network not connected to 100Mbps port
LED2	Green	On	Card is in full duplex mode
LED2	Green	Off	Card is not in full duplex mode
LED3	Green	On	Network connection is good
LED3	Green	Off	Network connection is broken
LED4	Green	Blinking	Data is being transmitted/received
LED4	Green	Off	Data is not being transmitted/received
LED5	Yellow	Blinking	Collision is detected on network
LED5	Yellow	Off	Collision is not detected on network