EP-201C Network Card Settings and Configuration
SURECOM TECHNOLOGY CORPORATION
EP-201C
Card Type | Ethernet Transceiver |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Linear bus |
Wiring Type | AUI transceiver via DB-15 port, RG-58A/U 50ohm coaxial |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | BNC connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE mode disabled | SW1 | Off |
SQE mode enabled | SW1 | On | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Red | On | Transceiver is receiving power |
LED1 | Red | Off | Transceiver is not receiving power |
My Books
