EP-201T Network Card Settings and Configuration
SURECOM TECHNOLOGY CORPORATION
EP-201T
Card Type | Ethernet Transceiver |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Star |
Wiring Type | AUI transceiver via DB-15 port, RJ-45 Unshielded twisted pair |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | RJ-45 connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE mode disabled | SW1 | Off |
SQE mode enabled | SW1 | On | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Network connection is good |
LED1 | Green | Off | Network connection is broken |
LED2 | Red | Blinking | Collision detected on network |
LED2 | Red | Off | No collision detected on network |
LED3 | Green | Blinking | Data is being transmitted |
LED3 | Green | Off | Data is not being transmitted |
LED4 | Yellow | Blinking | Data is being received |
LED4 | Yellow | Off | Data is not being received |
My Books
