E-LAN 200 Network Card Settings and Configuration
SIIG, INC.
E-LAN 200
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Available |
Network Transfer Rate | Unidentified |
Topology | Linear Bus, Star |
Wiring Type | AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Data Bus | 16-bit ISA |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 port | CN1 | RG-58A/U connector | CN2 |
BUS COMPATIBILITY SELECTION | ||
Setting | JP2 | |
» | AT BUS Timing compatible | Pins A & B closed |
| Not fully AT compatible | Pins B & C closed |
BASE I/O ADDRESS SELECTION | |||
Setting | J1 | J2 | |
» | 300h | Closed | Closed |
| 320h | Open | Closed |
| 340h | Closed | Open |
| 360h | Open | Open |
INTERRUPT SELECTION | |||||
IRQ | JP1/A | JP1/B | JP1/C | JP1/D | |
| 2 | Closed | Open | Open | Open |
» | 3 | Open | Closed | Open | Open |
| 4 | Open | Open | Closed | Open |
| 5 | Open | Open | Open | Closed |
CABLE TYPE SELECTION | |||||||
Type | JD/A | JD/B | JD/C | JD/D | JD/E | JD/F | |
» | RG-58A/U 50ohm coaxial | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 | Pins 1 & 2 |
| AUI transceiver via DB-15 port | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 |
Note: Designated pins are closed. | |||||||
BOOT ROM CONFIGURATION | ||
Setting | J6 | |
» | Disabled | Open |
| Enabled | Closed |
ROM ADDRESS SELECTION | ||||
Address | J3 | J4 | J5 | |
| C000h | Closed | Closed | Closed |
| C400h | Open | Closed | Closed |
» | C800h | Closed | Open | Closed |
| CC00h | Open | Open | Closed |
| D000h | Closed | Closed | Open |
| D400h | Open | Closed | Open |
| D800h | Closed | Open | Open |
| DC00h | Open | Open | Open |
DIAGNOSTIC LED(S) |
Note: Functions of LED1, LED2, LED3, and LED4 are unidentified. |
My Books
