E-LAN 100 Network Card Settings and Configuration

SIIG, INC.

E-LAN 100

Card Type
Network Interface Card
NIC Type
Ethernet
Maximum Onboard Memory
16KB
Boot ROM
Available
Network Transfer Rate
10Mbps
Topology
Linear Bus
Wiring Type
AUI transceiver via DB-15 port
RG-58A/U 50ohm coaxial
Data Bus
8-bit ISA

CONNECTIONS
Function
Label
Function
Label
AUI transceiver via DB-15 port
CN1
RG-58A/U connector
CN2

USER CONFIGURABLE SETTINGS
Function
Label
Position
»
Boot ROM disabled
J5/A
Open

Boot ROM enabled
J5/A
Closed

ROM ADDRESS SELECTION
Address
J5/B
J5/C
J5/D
J5/E
J5/F
»
C000h
Closed
Closed
Closed
Closed
Closed

C200h
Open
Closed
Closed
Closed
Closed

C400h
Closed
Open
Closed
Closed
Closed

C600h
Open
Open
Closed
Closed
Closed

C800h
Closed
Closed
Open
Closed
Closed

F600h
Open
Open
Closed
Open
Open

F800h
Closed
Closed
Open
Open
Open

FA00h
Open
Closed
Open
Open
Open

FC00h
Closed
Open
Open
Open
Open

FE00h
Open
Open
Open
Open
Open
Note:
A total of 32 address settings are available. The switches are a binary representation of the decimal memory addresses. Switch J5/F is the Most Significant Bit and switch J5/B is the Least Significant Bit. The switches have the following decimal values: J5/F=4096, J5/E=2048, J5/D=1024, J5/C=512, J5/B=256. Turn off the switches and add the values of the switches to obtain the correct memory address. (Open=1, Closed=0)
Note:
Do not use the following addresses in AT systems: C000h-C600h, and E000h-F400h.
Note:
Do not use the following addresses in XT systems: C800H, and CA00h.

BASE I/O ADDRESS SELECTION
Setting
J4/A
J4/B
»
300h
Closed
Closed

320h
Open
Closed

340h
Closed
Open

360h
Open
Open

CABLE TYPE SELECTION
Setting
J3/A
J3/B
J3/C
J3/D
J3/E
J3/F
J3/W1
»
BNC enabled
Pin 1 & 2
Pin 1 & 2
Pin 1 & 2
Pin 1 & 2
Pin 1 & 2
Pin 1 & 2
Closed

AUI enabled
Pin 2 & 3
Pin 2 & 3
Pin 2 & 3
Pin 2 & 3
Pin 2 & 3
Pin 2 & 3
Open
Note: Designated pins are closed.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

E-LAN 100 Network Card Settings and Configuration

Search

My Books

Discover

Card Type	Network Interface Card
NIC Type	Ethernet
Maximum Onboard Memory	16KB
Boot ROM	Available
Network Transfer Rate	10Mbps
Topology	Linear Bus
Wiring Type	AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial
Data Bus	8-bit ISA

CONNECTIONS
Function	Label	Function	Label
AUI transceiver via DB-15 port	CN1	RG-58A/U connector	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Boot ROM disabled	J5/A	Open
	Boot ROM enabled	J5/A	Closed

ROM ADDRESS SELECTION
Address		J5/B	J5/C	J5/D	J5/E	J5/F
»	C000h	Closed	Closed	Closed	Closed	Closed
	C200h	Open	Closed	Closed	Closed	Closed
	C400h	Closed	Open	Closed	Closed	Closed
	C600h	Open	Open	Closed	Closed	Closed
	C800h	Closed	Closed	Open	Closed	Closed
	F600h	Open	Open	Closed	Open	Open
	F800h	Closed	Closed	Open	Open	Open
	FA00h	Open	Closed	Open	Open	Open
	FC00h	Closed	Open	Open	Open	Open
	FE00h	Open	Open	Open	Open	Open
Note: A total of 32 address settings are available. The switches are a binary representation of the decimal memory addresses. Switch J5/F is the Most Significant Bit and switch J5/B is the Least Significant Bit. The switches have the following decimal values: J5/F=4096, J5/E=2048, J5/D=1024, J5/C=512, J5/B=256. Turn off the switches and add the values of the switches to obtain the correct memory address. (Open=1, Closed=0)
Note: Do not use the following addresses in AT systems: C000h-C600h, and E000h-F400h.
Note: Do not use the following addresses in XT systems: C800H, and CA00h.

BASE I/O ADDRESS SELECTION
Setting		J4/A	J4/B
»	300h	Closed	Closed
	320h	Open	Closed
	340h	Closed	Open
	360h	Open	Open

CABLE TYPE SELECTION
Setting		J3/A	J3/B	J3/C	J3/D	J3/E	J3/F	J3/W1
»	BNC enabled	Pin 1 & 2	Pin 1 & 2	Pin 1 & 2	Pin 1 & 2	Pin 1 & 2	Pin 1 & 2	Closed
	AUI enabled	Pin 2 & 3	Pin 2 & 3	Pin 2 & 3	Pin 2 & 3	Pin 2 & 3	Pin 2 & 3	Open
Note: Designated pins are closed.