E-LAN 200T Network Card Settings and Configuration

Card Type	Network Interface Card
NIC Type	Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Available
Network Transfer Rate	10Mbps
Topology	Star, linear bus
Wiring Type	RJ-45 Unshielded Twisted Pair AUI transceiver
Data Bus	16-bit ISA

CONNECTIONS
Function	Label	Function	Label
10 Base-5 AUI connector	CN1	10 Base-T UTP connector	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	AT bus timing	J1	Pins 1 & 2 closed
	Not fully AT bus timing	J1	Pins 2 & 3 closed
»	Remote boot disable	SW1/8	Off
	Remote boot enable	SW1/8	On
»	Factory configured - do not alter	JP1	Reserved

BIOS ADDRESS SELECTION
Address		SW1/5	SW1/6	SW1/7
	C000h	On	On	On
	C400h	Off	On	On
»	C800h	On	Off	On
	CC00h	Off	Off	On
	D000h	On	On	Off
	D400h	Off	On	Off
	D800h	On	Off	Off
	DC00h	Off	Off	Off

BASE I/O ADDRESS SELECTION
Setting		SW1/3	SW1/4
»	300h	On	On
	320h	Off	On
	340h	On	Off
	360h	Off	Off

INTERRUPT SELECTION
IRQ		SW1/1	SW1/2
	2	On	On
»	3	Off	On
	4	On	Off
	5	Off	Off

DIAGNOSTIC LED(S)

Note: Functions of LED1, LED2, LED3, LED4 are unidentified.