FE510 Network Card Settings and Configuration
MACSENSE CONNECTIVITY, INC.
FE510
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Unidentified |
Network Transfer Rate | 10/100Mbps |
Topology | Star |
Wiring Type | Unshielded twisted pair |
Data Bus | Mac PCI |
CONNECTIONS | |
Function | Label |
UTP via RJ-45 connector | CN1 |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | UTP link is good |
LED1 | Green | Off | UTP link is broken |
LED2 | Green | On | Data is being transmitted/received at 100Mbps |
LED2 | Green | Off | Data is not being transmitted/received at 100Mbps |
LED3 | Green | On | Full duplex enabled for 10/100Mbps data transfers |
LED3 | Green | Off | Full duplex disabled for 10/100Mbps data transfers |
LED4 | Green | Blinking | Data is being transmitted/received |
LED4 | Green | Off | Data is not being transmitted/received |
My Books
