PC NETWORK ADAPTER (BROADBAND) Network Card Settings and Configuration

NIC Type	Broadband
Transfer Rate	Unidentified
Data Bus	8-bit ISA
Topology	Star
Wiring Type	RG-11A/U RG-59A/U coaxial
Boot ROM	Not Available

INTERRUPT REQUEST SELECTION
IRQ	JP1
2	Pins 2 & 3 Closed
3	Pins 1 & 2 Closed

I/O ADDRESS SELECTION
Address	JP2
360h	Pins 2 & 3 closed
368h	Pins 1 & 2, 3 & 4 closed

ROM BIOS CONFIGURATION
Setting		JP3
»	Enabled	Closed
	Disabled	Open

MISCELLANEOUS TECHNICAL NOTES

The DMA channel is permanently fixed at 3. If two adapters will be installed into one station then disable the ROM BIOS on the second adapter.