PC NETWORK ADAPTER (BASEBAND) Network Card Settings and Configuration
IBM CORPORATION
PC NETWORK ADAPTER (BASEBAND)
NIC Type | Baseband |
Transfer Rate | Unspecified |
Data Bus | 8-bit ISA |
Topology | Linear Bus |
Wiring Type | Twisted pair (8-wire) |
Boot ROM | Not Available |
INTERRUPT REQUEST | ||
IRQ | JP1 | |
| » | 2 | Pins 1 & 2 closed |
3 | Pins 2 & 3 closed | |
I/O ADDRESS | ||
Address | JP4 | |
| » | 620h | Pins 1 & 2 closed |
628h | Pins 2 & 3 closed | |
BASE MEMORY ADDRESS | ||
Address | JP5 | |
| » | CC00h | Pins 1 & 2 closed |
DC00h | Pins 2 & 3 closed | |
ROM BIOS | ||
Setting | JP7 | |
| » | Enabled | Pins 1 & 2 closed |
Disabled | Pins 2 & 3 closed | |
BOOT ROM | ||
Setting | JP6 | |
| » | Disabled | Pins 1 & 2 closed |
Enabled | Pins 2 & 3 closed | |
MISCELLANEOUS TECHNICAL NOTES |
The DMA channel is permanently fixed at 3. If two adapters will be installed into one station then disable the ROM BIOS on the second adapter. |
My Books
