EN-9400P3 Network Card Settings and Configuration
DANPEX CORPORATION
EN-9400P3
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 32-bit PCI |
Topology | Linear bus Star |
Wiring Type | AUI Transceiver via DB-15 port RG-58A/U 50ohm coaxial Unshielded twisted pair |
Boot ROM | Available |
CABLE TYPE SELECTION | ||
Type | JP1 | |
| » | RG-58A/U 50ohm coaxial | Pins 1 & 2 closed |
AUI Transceiver via DB-15 port | Pins 2 & 3 closed | |
PCI INTERRUPT SELECTION | |||||
PCI INT | JP2/A | JP2/B | JP2/C | JP2/D | |
| » | INTA | Closed | Open | Open | Open |
INTB | Open | Closed | Open | Open | |
INTC | Open | Open | Closed | Open | |
INTD | Open | Open | Open | Closed | |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
1 | On | Data is being transmitted/received |
1 | Off | Data is not being transmitted/recieved |
2 | On | Network connection is good |
2 | Off | Network connection is broken |
My Books
