FASTLINE-PCI UTP (10/100BASE TX) Network Card Settings and Configuration
COMPU-SHACK PRODUCTION, GMBH
FASTLINE-PCI UTP (10/100BASE TX)
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Unidentified |
Network Transfer Rate | 10/100Mbps (20/200Mbps full duplex) |
Topology | Star |
Wiring Type | RJ-45 Unshielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |
Function | Label |
RJ-45 connector | CN1 |
TYPE 1 DIAGNOSTIC LEDS | |||
LED | Color | Status | Condition |
LED1 | Green | On | UTP link is good |
LED1 | Green | Off | UTP link is broken |
LED2 | Green | On | Adapter card is in 100Mbps mode |
LED2 | Green | Off | Adapter card is not in 100Mbps mode |
LED4 | Green | On | Data is being transmitted/received |
LED4 | Green | Off | Data is not being transmitted/received |
TYPE 2 DIAGNOSTIC LEDS | |||
LED | Color | Status | Condition |
LED1 | Green | On | UTP link is good |
LED1 | Green | Off | UTP link is broken |
LED2 | Green | On | Adapter card is in 100Mbps mode |
LED2 | Green | Off | Adapter card is not in 100Mbps mode |
LED3 | Green | On | Adapter card is in full duplex mode |
LED3 | Green | Off | Adapter card is not in full duplex mode |
LED4 | Green | On | Data is being transmitted/received |
LED4 | Green | Off | Data is not being transmitted/received |
My Books
