SS3201B Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
SS3201B
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE(AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
4-pin connector - drive active LED | J1 |
40-pin IDE(AT) connector | J3 |
34-pin floppy drive connector | J4 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | IRQ 14 is unbuffered | J2/pins 1 & 2 | closed |
| IRQ 14 is buffered & delayed | J2/pins 2 & 3 | closed | |
| » | Floppy drive primary address is 3F0h | J5/pins 1 & 2 | closed |
| Floppy drive secondary address is 370h | J5/pins 2 & 3 | closed | |
Note: Location of pin 1 is unidentified. | |||
My Books
