SUN-2110 Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Three/quarter-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
15-pin game port - internal	J1
34-pin control cable connector - floppy drive	J2
10-pin serial port (COM2/4) - internal	J3
10-pin serial port (COM1/3) - internal	J4
15-pin analog VGA port - external	J5
25-pin parallel port (LPT1/2/3) - external	J6
40-pin IDE(AT) Interface connector	J7
26-pin video feature connector	J8
2-pin connector - Drive active LED	LED1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
	VGA connector enabled	JP1	pins 1 & 2 closed
	VESA feature connector enabled	JP1	pins 2 & 3 closed
	Monochrome video mode enabled	JP2	closed
	Color video mode enabled	JP2	open
	Interlaced video mode enabled	JP3	closed
	Non-interlaced video mode enabled	JP3	open
»	Hard drive enabled	JP4/jumper 1	closed
	Hard drive disabled	JP4/jumper 1	open
»	Game Port (J1) enabled	JP4/jumper 2	closed
	Game Port (J1) disabled	JP4/jumper 2	open
»	Floppy drive enabled	JP4/jumper 3	closed
	Floppy drive disabled	JP4/jumper 3	open
»	Serial Port 1 (J4) enabled	JP4/jumper 4	closed
	Serial Port 1 (J4) disabled	JP4/jumper 4	open
»	Serial Port 2 (J3) enabled	JP4/jumper 7	closed
	Serial Port 2 (J3) disabled	JP4/jumper 7	open
»	Serial Port 1 (J4) is set to COM1 Serial Port 2 (J3) is set to COM2	JP4/jumper 8	open
	Serial Port 1 (J4) is set to COM3 Serial Port 2 (J3) is set to COM4	JP4/jumper 8	closed

PARALLEL PORT (J6) CONFIGURATION
LPT	JP4/jumper 5	JP4/jumper 6
LPT1 enabled	open	closed
LPT2 enabled	closed	open
LPT3 enabled	closed	closed
Disabled	open	open