SNB-C025 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
SNB-C025
Data bus: | 16-bit ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE (AT) interface connector | CN1 |
34-pin control cable connector - floppy drive | CN2 |
2-pin connector - drive active LED | LED1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | IOCHRDY disabled | JP1 | open |
| IOCHRDY enabled | JP1 | closed | |
| » | Single drive speed | JP2 | open |
| Dual drive speed | JP2 | closed | |
My Books
