KT-105F(G) Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
KT-105F(G)
Data bus: | 16-bit, ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE(AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
40-pin IDE(AT) connector | JP1 |
2-pin connector - drive active LED | JP2 |
34-pin floppy drive connector | JP9 |
16-pin game port | JP10 |
10-pin serial port 2 - internal | JP11 |
9-pin serial port 1 - external | JP12 |
25-pin parallel port - external | JP13 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| Single IDE drive is connected to KT-105F(G) | JP3 | closed | |
| Two IDE drives are connected to KT-105F(G) | JP3 | open | |
| Parallel port is uni-directional | JP4 | closed | |
| Parallel port is bi-directional | JP4 | open | |
| Hard drive is primary in system | JP7/1 pins 1 & 2 | closed | |
| Hard drive is secondary in system | JP7/1 pins 2 & 3 | closed | |
| » | Floppy drives order is A:, B: | JP7/2 pins 2 & 3 | closed |
| Floppy drives order is B:, A: | JP7/2 pins 1 & 2 | closed | |
| » | Floppy drive is primary in system | JP7/3 pins 1 & 2 | closed |
| Floppy drive is secondary in system | JP7/3 pins 2 & 3 | closed | |
| » | IDE interface enabled | JP7/4 pins 2 & 3 | closed |
| IDE interface disabled | JP7/4 pins 1 & 2 | closed | |
| » | Floppy drive enabled | JP7/5 pins 2 & 3 | closed |
| Floppy drive disabled | JP7/5 pins 1 & 2 | closed | |
SERIAL PORT 1 CONFIGURATION | |||
Address | JP6/1 | JP6/2 | |
| » | 3F8h (COM1) | pins 2 & 3 closed | pins 1 & 2 closed |
| 3E8h (COM3) | pins 1 & 2 closed | pins 2 & 3 closed | |
2E8h (COM4) | pins 2 & 3 closed | pins 2 & 3 closed | |
| Disabled | pins 1 & 2 closed | pins 1 & 2 closed | |
SERIAL PORT 2 CONFIGURATION | |||
Address | JP6/3 | JP6/4 | |
| » | 2F8h (COM2) | pins 2 & 3 closed | pins 1 & 2 closed |
| 3E8h (COM3) | pins 2 & 3 closed | pins 2 & 3 closed | |
| 2E8h (COM4) | pins 1 & 2 closed | pins 2 & 3 closed | |
| Disabled | pins 1 & 2 closed | pins 1 & 2 closed | |
PARALLEL PORT CONFIGURATION | |||
Address | JP6/5 | JP6/6 | |
| » | 378h (LPT1) | pins 1 & 2 closed | pins 2 & 3 closed |
| 278h (LPT2) | pins 2 & 3 closed | pins 1 & 2 closed | |
| 3BCh (LPT3) | pins 2 & 3 closed | pins 2 & 3 closed | |
| Disabled | pins 1 & 2 closed | pins 1 & 2 closed | |
SERIAL PORT 1 INTERRUPT SELECTION | ||||
IRQ | JP8/1 | JP8/2 | JP8/3 | |
| » | 4 | closed | open | open |
| 3 | open | closed | open | |
| 5 | open | open | closed | |
SERIAL PORT 2 INTERRUPT SELECTION | ||||
IRQ | JP8/4 | JP8/5 | JP8/6 | |
| » | 3 | closed | open | open |
| 4 | open | closed | open | |
| 5 | open | open | closed | |
PARALLEL PORT INTERRUPT SELECTION | |||
IRQ | JP8/7 | JP8/8 | |
| » | 7 | closed | open |
| 5 | open | closed | |
My Books
