KT-103F Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
KT-103F
Data bus: | 16-bit ISA |
Size: | Half-length, full-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
34-pin control cable connector - floppy drive | J1 |
40-pin IDE (AT) interface connector | J2 |
4-pin connector - drive active LED | J3 |
USER CONFIGURABLE SETTINGS | |||
| Function | Location | Setting | |
| » | IRQ14 (Unqualified) | W1/pins 1 & 2 | closed |
| IRQ14 (Delayed until active) | W1/pins 3 & 4 | closed | |
| » | Floppy drive enabled | W3 | closed |
| Floppy drive disabled | W3 | open | |
My Books
