SUPER I/O CARD FOR 286/386/486 Hard Disk/Floppy Controller Settings and Configuration
UNIDENTIFIED
SUPER I/O CARD FOR 286/386/486
Data bus: | 16-bit, ISA |
Size: | Half-length, half-height card |
Hard drive supported: | Two IDE (AT) Interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
25-pin parallel port (LPT1/2) - external | CN1 |
16-pin game port - external | CN2 |
10-pin serial port (COM1/3) - internal | CN3 |
10-pin serial port (COM2/4) - internal | CN4 |
40-pin IDE (AT) Interface connector | CN5 |
34-pin control cable connector - floppy drive | CN6 |
Drive active LED connector | Location Unidentified |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Floppy disk drive - enabled | JP1 | open |
Floppy disk drive - disabled | JP1 | closed | |
| » | Hard disk drive - enabled | JP2 | open |
Hard disk drive - disabled | JP2 | closed | |
| » | Serial port 1 (3F8-3FFh/COM1) | JP3 | open |
Serial port 1 (3E8-3EFh/COM3) | JP3 | closed | |
| » | Serial port 2 (2F8-2FFh/COM2) | JP4 | open |
Serial port 2 (2E8-2EFh/COM4) | JP4 | closed | |
| » | Parallel port (378-37Fh/LPT2) | JP5 | open |
Parallel port (278-27Fh/LPT3) | JP5 | closed | |
My Books
