SUPER I/O CONTROLLER CARD Hard Disk/Floppy Controller Settings and Configuration

Data bus:	16-bit, ISA
Size:	Full-length, full-height card
Hard drive supported:	Two IDE (AT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
2-pin connector - drive active LED	CN1
16-pin game port - external	CN2
40-pin IDE (AT) Interface connector	CN3
34-pin control cable connector - floppy drive	CN4
10-pin serial port (COM2/4) - internal	CN5
10-pin serial port (COM1/3) - internal	CN6
25-pin parallel port (LPT1/2) - external	CN7

USER CONFIGURABLE SETTINGS
Function	Location	Setting
Game port enable	JP1	Pins 1 & 2 closed
Game port disable	JP1	Pins 2 & 3 closed
Hard disk enable	JP2	Pins 1 & 2 closed
Hard disk disable	JP2	Pins 2 & 3 closed
Floppy disk enable	JP3	Pins 1 & 2 closed
Floppy disk disable	JP3	Pins 2 & 3 closed
Serial port 1 - COM1	JP4	Pins 1 & 2 closed
Serial port 1 - COM3	JP4	Pins 2 & 3 closed
Serial port 1 enable	JP5	Pins 1 & 2 closed
Serial port 1 disable	JP5	Pins 2 & 3 closed
Serial port 2 - COM2	JP6	Pins 1 & 2 closed
Serial port 2 - COM4	JP6	Pins 2 & 3 closed
Serial port 2 enable	JP7	Pins 1 & 2 closed
Serial port 2 disable	JP7	Pins 2 & 3 closed
Parallel port - LPT2	JP8	Pins 1 & 2 closed
Parallel port - LPT3	JP8	Pins 2 & 3 closed
Parallel port enable	JP9	Pins 1 & 2 closed
Parallel port disable	JP9	Pins 2 & 3 closed
IOCHRDY - disable	JP10	Closed
IOCHRDY - enable	JP10	Open
HDC Installed	JX1	Pins 1 & 2 closed
HDC Not Installed	JX1	Pins 2 & 3 closed
IDE type XT	JX2	Pins 1 & 2 closed
IDE type AT	JX2	Pins 2 & 3 closed
Primary hard disk address - 1F0-1F7H, 3F6H, 3F7H	JX3	Pins 1 & 2 closed
Secondary hard disk address - 170-177h, 376h, 377h	JX3	Pins 2 & 3 closed
Primary floppy address - 3F2-3F5h, 3F7, 1F7h	JX4	Pins 1 & 2 closed
Secondary floppy address - 372-375h, 377h, 177h	JX4	Pins 2 & 3 closed