TMC RESEARCH CORPORATION
CP326, CP328 (VER. 1.0)
Data bus: | 32-bit, VL-Bus |
Size: | Three/quarter-length, full-height card |
Hard drive supported: | Two IDE (AT) interface drives |
Floppy drives supported: | Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function | Location |
4-pin connector - drive active LED | J1 |
40-pin IDE(AT) interface connector | J2 |
26-pin feature connector | J3 |
34-pin control cable connector - floppy drive | J4 |
16-pin game port - internal | J5 |
10-pin serial port 2 - internal | J6 |
10-pin serial port 1 - internal | J7 |
15-pin VGA connector - external | J8 |
25-pin parallel port - external | J9 |
USER CONFIGURABLE SETTINGS | ||
Function | Location | Setting |
IDE speed is 0 (lowest) | JP2/pins 1 & 2, 4 & 5 | closed |
IDE speed is 1 (average) | JP2/pins 2 & 3, 4 & 5 | closed |
IDE speed is 2 (highest) | JP2/pins 2 & 3, 5 & 6 | closed |
Parallel port enabled | JP7/pins 1 & 2 | closed |
Parallel port disabled | JP7/pins 2 & 3 | closed |
Floppy controller enabled | JP9/pins 1 & 2 | closed |
Floppy controller disabled | JP9/pins 2 & 3 | closed |
Parallel port is LPT2 | JP10/pins 1 & 2 | closed |
Parallel port is LPT3 | JP10/pins 2 & 3 | closed |
Game port enabled | JP11/ pins 1 & 2 | closed |
Game port disabled | JP11/ pins 2 & 3 | closed |
SERIAL PORT 1 CONFIGURATION | ||
COM | JP5 | JP6 |
COM1 | pins 1 & 2 closed | pins 1 & 2 closed |
COM3 | pins 2 & 3 closed | pins 1 & 2 closed |
Disabled | N/A | pins 2 & 3 closed |
SERIAL PORT 2 CONFIGURATION | ||
COM | JP3 | JP4 |
COM2 | pins 1 & 2 closed | pins 1 & 2 closed |
COM4 | pins 2 & 3 closed | pins 1 & 2 closed |
Disabled | N/A | pins 2 & 3 closed |
DRAM CONFIGURATION | ||
Size | Bank 0/1 | Bank 0/1 |
2MB | (8) 256K x 4 | (2) 512K x 8 |
Note: The orientation of the memory banks is unidentified. |