LCS-6624, LCS-6624G(REV. 1) Hard Disk/Floppy Controller Settings and Configuration
LONGSHINE MICROSYSTEM, INC.
LCS-6624, LCS-6624G(REV. 1)
Data bus: 16-bit, ISA
Size: half-length, full-height card
Hard drives supported: Two IDE drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Special Features: Two serial, one parallel
LCS-6624-G: Game port
CONNECTIONS | |
Function | Location |
34-pin data cable connector-floppy drive | J1 |
40-pin AT Interface (IDE) connector-internal | J2 |
16 pin game port-internal (LCS-6624-G) | J3 |
10-pin serial port 2-internal | J4 |
DB-9 male connector-serial port 1 | J5 |
DB-25 female connector-parallel port | J6 |
4-pin connector-drive active LED | JP1 |
USER CONFIGURABLE SETTINGS | |||
Function | Location | Setting | |
| » | Factory configured - do not alter | JP2/jumper 4 | closed |
| » | Factory configured - do not alter | JP3/jumper 3 | closed |
| » | Floppy drive enabled | JP4 | open |
Floppy drive disabled | JP4 | closed | |
| » | Hard drive enabled | JP4A | open |
Hard drive disabled | JP4A | closed | |
| » | Parallel port set to LPT2 on IRQ7 | JP5 & JP5A | pins 1 & 2 closed |
Parallel port set to LPT3 on IRQ5 | JP5 & JP5A | pins 2 & 3 closed | |
| » | LCS-6624 not grounded to host | JP6 | open |
LCS-6624 grounded to host | JP6 | closed | |
SERIAL PORT 1 (J5) CONFIGURATION | ||||
Port 2 | JP3/1 | JP2/2 | JP2/3 | |
| » | Serial port 1 set to COM1 (3F8H-3FFh) | closed | open | closed |
Serial port 1 set to COM3 (3E8H-3EFh)) | open | closed | closed | |
SERIAL PORT 2 (J4) CONFIGURATION | ||||
Port 2 | JP2/1 | JP2/2 | JP2/3 | |
| » | Serial port 2 set to COM2 (2F8H-2FFh) | closed | open | closed |
Serial port 2 set to COM4 (2E8H-2EFh) | open | closed | closed | |
My Books
