101 Re: Router Recommendations Wanted
Description
This article is from the Woodworking FAQ Collection 4, by multiple authors.
101 Re: Router Recommendations Wanted
From: jeffs@tekcrl.LABS.TEK.COM (Jeff Staley)
Date: 9 Oct 89 17:06:13 GMT
In article <16177@vail.ICO.ISC.COM> bobb@ico.ISC.COM (Bob Bundy) writes:
>In addition to the usual recommendations of 2+ hp and 1/2" collet, I would
>recommend one with the large adjustment knob on the top. This is always
>useful but makes a big difference if you are going to mount it in a router
>table. Makita used to make one but, inexplicably, dropped it....
A good way to overcome this limitation is to extend the adjustment knob
with a piece of stiff plastic tubbing. I extend my Makita with a 5"
section of tubbing with a homemade knob on top. Works fine.
Continue to:
My Books
