3.) Electrochemical nomenclature, standards, etc.
Description
This article is from the Electrochemistry FAQ, by Zoltan Nagy nagy@anl.gov with numerous contributions by others.
3.) Electrochemical nomenclature, standards, etc.
Manual of symbols and terminology for physicochemical quantities and units,
Appendix III, Electrochemical nomenclature (IUPAC Recommendations 1973)
R. Parsons, Pure Appl. Chem. 37, 499-516 (1974).
Classification and nomenclature of electroanalytical techniques (IUPAC Rules
1975)
Pure Appl. Chem. 45, 81-97 (1976).
Recommendations for sign convention and plotting of electrochemical data (IUPAC
Rules 1975)
Pure Appl. Chem. 45, 131-134 (1976).
Recommendations for nomenclature of ion-selective electrodes (IUPAC
Recommendations 1975)
Pure Appl. Chem. 48, 127-132 (1976).
Electrode reaction orders, transfer coefficients, and rate constants:
amplification of definitions and recommendations for publication of parameters
(IUPAC Recommendations 1979)
R. Parsons, Pure Appl. Chem. 52, 233-240 (1979) and Electrochim. Acta, 26,
1867-1874 (1981).
Nomenclature for transport phenomena in electrolytic systems (IUPAC
Recommendations 1979)
N. Ibl, Pure Appl. Chem. 53, 1827-1840 (1981) and Electrochim. Acta, 27,
629-642 (1982).
Recommendations for publishing manuscripts on ion-selective electrodes (IUPAC
Recommendations 1981)
G.G. Guilbault, Pure Appl. Chem. 53, 1907-1912 (1981).
Recommendations on reporting electrode potentials in nonaqueous solvents (IUPAC
Recommendations 1983)
G. Gritzner and J. Kuta, Pure Appl. Chem. 56, 461-466 (1984)
and Electrochim. Acta, 29, 869-873 (1984).
Definition of pH scales, standard reference values, measurement of pH, and
related terminology (IUPAC Recommendations 1984)
A.K. Covington, R.G. Bates, and R.A. Durst, Pure Appl. Chem. 57, 531-542
(1985).
Criteria for standardization of pH measurements in organic solvents and water +
organic solvent mixtures of moderate to high permittivities (IUPAC Technical
Report)
T. Mussini, A.K. Covington, P. Longhi, and S. Rondini, Pure Appl. Chem.
57, 865-876 (1985).
Procedures for testing pH responsive glass electrodes at 25, 37, 65 and 85 deg.
Celsius and determination of alkaline errors up to 1 mol/(cu dm) Na+, K+, Li+
(IUPAC Technical Report)
A.K. Covington, H.P. Butikofer, M.F.G.F.C. Camoes, M.I.A. Ferra, and M.J.F.
Rebelo, Pure Appl. Chem. 57, 887-898 (1985).
Recommended terms, symbols, and definitions for electroanalytical chemistry
(IUPAC Recommendations 1985)
L. Meites, P. Zuman, and H.W. Nurnberg, Pure Appl. Chem. 57, 1491-1505
(1985).
Interphases in systems of conducting phases (IUPAC Recommendations 1985)
S. Trasatti and R. Parsons, Pure Appl. Chem. 58, 437-454 (1986) and
J. Electroanal. Chem., 205, 359-376 (1986).
The absolute electrode potential: an explanatory note (IUPAC Recommendations
1986)
S. Trasatti, Pure Appl. Chem. 58, 955-966 (1986).
Reference value standards and primary standards for pH mesurements in organic
solvents and water + organic solvent mixtures of moderate to high
permittivities (IUPAC Technical Report)
S. Rondini, P.R. Mussini, and T. Mussini, Pure Appl. Chem. 59, 1549-1560
(1987).
Recommendations for the detrmination of pH in sea water and estuarine waters
(IUPAC Technical Report)
A.K. Covington and M. Whitfield, Pure Appl. Chem. 60, 865-870 (1988).
Electrochemical corrosion nomenclature (IUPAC Recommendations 1988)
K.E. Heusler, D. Landolt, and S. Trasatti, Pure Appl. Chem. 61, 19-22 (1989)
and Electrochim. Acta, 35, 295-298 (1990).
Terminology in semiconductor electrochemistry and photoelectrochemical energy
conversion (IUPAC Recommendations 1991)
A.J. Bard, R. Memming, and B. Miller, Pure Appl. Chem. 63, 569-596 (1991).
Nomenclature, symbols, definitions, and measurements for electrified interfaces
in aqueous dispersions of solids (IUPAC Recommendations 1991)
J. Lyklema, Pure Appl. Chem. 63, 895-906 (1991).
Nomenclature, symbols, and definitions in electrochemical engineering (IUPAC
Recommendations 1993)
G. Gritzner and G. Kreysa, Pure Appl. Chem. 65, 1009-1020 (1993),
and J. Electroanal. Chem. 360, 351-362 (1993).
Terminology and conventions for microelectronic ion-sensitive field effect
transistor devices in electrochemistry (IUPAC Recommendations 1994)
A.K. Covington, Pure Appl. Chem. 66, 565-569 (1994).
Recommendations for the electrometric determination of the pH of atmospheric
wet
deposition (acid rain) (IUPAC Technical Report)
R.A. Durst, W. Davison, and W.F. Koch, Pure Appl. Chem. 66, 649-658 (1994).
Impedances of electrochemical systems: terminology, nomenclature, and
representation. Part I: cells with metal electrodes and liquid solutions (IUPAC
Recommendations 1994)
M. Sluyters-Rehbach, Pure Appl. Chem. 66, 1831-1891 (1994).
Recommendations for nomenclature of ion-sensitive electrodes (IUPAC
Recommendations 1994)
R.P. Buck and E. Lindner, Pure Appl. Chem. 66, 2527-2536 (1994).
Terminology and notations for multistep electrochemical reaction mechanisms
(IUPAC Recommendations, 1994)
C.P. Andrieux, Pure Appl. Chem. 66, 2445-2450 (1994).
Selectivity coefficients for ion-selective electrodes: recommended methods for
reporting K(pot,a,b) values (IUPAC Technical Report)
Y. Umezawa, K. Umezawa, and H. Sato, Pure Appl. Chem. 67, 507-518 (1995).
Chemically modified electrodes: recommended terminology and definitions (IUPAC
Recommendations 1997)
R.A. Durst, A.J. Baumner, R.W. Murray, R.P. Buck, and C.P. Andrieux, Pure
Appl. Chem. 69, 1317-1323 (1997).
Consistency of pH standard values with the corresponding thermodynamic and
dissociation constants (IUPAC Technical Report)
M.F. Camoes, M.J.G. Lito, M.I.A. Ferra, and A.K. Covington, Pure Appl. Chem.
69, 1325-1333 (1997).
Analytical aspects of chemically modified electrodes: classification, critical
evaluation and recommendations (IUPAC Recommendations 1998)
W. Kutner, J. Wang, M. L'her, and R.P. Buck, Pure Appl. Chem. 70, 1301-1318
(1998).
Spectroelectrochemistry: a survey of in situ spectroscopic techniques (IUPAC
Technical Report)
W. Plieth, G.S. Wilson, and C. Gutierrez de la Fe, Pure Appl. Chem. 70,
1395-1414 (1998).
pH measurements in non-aqueous and mixed solvents: predicting pH(PS) of
potassium hydrogen phtalate for alcohol-water mixtures (IUPAC Technical Report)
S. Rondindini, P.R. Mussini, T. Mussini, and A. Vertova, Pure Appl. Chem.
70, 1419-1422 (1998).
Terminology and convention for electrochemical stripping analysis (IUPAC
Technical Report)
A. Fogg and J. Wang, Pure Appl. Chem. 71, 891-897 (1999).
A critical evaluation of the redox properties of uranium, neptonium, and
plutonium ions in acidic solutions
S. Kihara, Z. Yoshida, H. Aoyagi, K. Maeda, O. Shirai, Y. Katatsuji, and
Y. Yoshida, Pure Appl. Chem. 71, 1771-1807 (1999).
Electrochemical biosensors: recommended definitions and classification (IUPAC
Technical Report)
D.R. Thevenot, K. Toth, R.A. Durst, and G.S. Wilason, Pure Appl. Chem. 71,
2333-2348 (1999).
Microelectrodes. Definitions, characterization, and applications (IUPAC
Technical Report)
K. Stulik, C. Amatore, K. Holub, V. Marecek, and W. Kutner, Pure Appl. Chem.
72, 1483-1492 (2000).
Potentiometric selectivity coefficients of ion-selective electrodes, part I,
inorganic cations (IUPAC Technical Report)
Y. Umezawa, P. Buhlmann, K. Umezawa, K. Tohda, and S. Amemiya, Pure Appl.
Chem. 72, 1851-2082 (2000).
Molality-based primary standards of electrolytic conductivity (IUPAC Technical
Report)
K.W. Pratt, W.F. Koch, Y.C. Wu, and P.A. Berezansky, Pure Appl. Chem. 73,
1783-1793 (2001).
Sulfate sensing electrodes. The lead-amalgam/lead-sulfate electrode (IUPAC
Technical Report)
P.R. Mussini and T. Mussini, Pure Appl. Chem. 74, 593-600 (2002).
Polyaniline. Preparation of a conducting polymer (IUPAC Technical Report)
J. Stejskal and R.G. Gilbert, Pure Appl. Chem. 74, 857-867 (2002).
Potentiometric selectivity coefficients of ion-selective electrodes, part II,
inorganic anions (IUPAC Technical Report)
Y. Umezawa, K. Umezawa, P. Buhlmann, N. Hamada, H. Aoki, J. Nakanishi,
M. Sato, K.P. Xiao, and Y. Nishimura, Pure Appl. Chem. 74, 923-994 (2002).
Potentiometric selectivity coefficients of ion-selective electrodes, part III,
organic ions (IUPAC Technical Report)
Y. Umezawa, P. Buhlmann, K. Umezawa, N. Hamada, Pure Appl. Chem. 74,
995-1099 (2002).
Measurement of pH. Definition, satandards, and procedures
R.P. Buck, S. Rondinini, A.K. Covington, F.G.K. Baucke, C.M.A. Brett,
M.F. Camoes, M.J.T. Milton, T. Mussini, R. Naumann, K.W. Pratt, P. Spitzer,
and G.S. Wilson, Pure Appl. Chem. 74, 2169-2200, 2002.
Continue to:
My Books
