WANGTEK ETS420C Tape drive card Settings and Configuration
TECMAR
WANGTEK ETS420C
Device Type | External Tape Drive |
Interface | SCSI |
Format | QICWide, Travan TR-4 |
Sustained Transfer Rate | Unidentified |
Size | External dimensions unidentified |
View | Top |
DRIVE SELECT ID |
Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window. |
MANUFACTURERS RECOMMENDED MEDIA | ||
Tape | Capacity Without Compression | Capacity With Compression |
QICWide | 2.0GB | 4.0GB |
Travan 4 | 4.0GB | 8.0GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Drive ready/cartridge loaded and initialized |
LED1 | Green | Slow Flash | Drive is active or a cartridge is being initialized |
LED1 | Green | Fast Flash | Drive firmware is being downloaded and updated or a drive fault has occurred |
LED1 | Green | Off | Drive not active |
LED2 | Unidentified | N/A | N/A |
LED3 | Green | On | Drive power is on |
LED3 | Green | Off | Drive power is off |
Note: LED2 is not used. | |||
My Books
