WANGTEK E5525ES, WANGTEK E51000HT, WANGTEK E52000HT Tape drive card Settings and Configuration
TECMAR
WANGTEK E5525ES, WANGTEK E51000HT, WANGTEK E52000HT
Device Type | External Tape Drive |
Interface | SCSI |
Format | Quarter Inch |
Sustained Transfer Rate | Unidentified |
Size | External dimensions unidentified |
View | Top |
DRIVE SELECT ID |
Note: SCSI ID is selected by activating SW1 until the desired number is displayed in the viewing window. |
MANUFACTURERS RECOMMENDED MEDIA | ||
Drive | Tape | Capacity Without Compression |
E5525ES | DC6250 | 250 MB |
E5525ES | DC6525 | 525 MB |
E51000HT | DC6250 | 250 MB |
E51000HT | DC6525 | 525 MB |
E51000HT | DC9120 | 1.2 GB |
E52000HT | DC6250 | 250 MB |
E52000HT | DC6525 | 525 MB |
E52000HT | DC9120 | 1.2 GB |
E52000HT | DC9250 | 2.5 GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Amber | Flashing | Drive activity on the SCSI bus |
LED1 | Amber | Pulsing | Drive fault condition exists |
LED1 | Amber | Off | Drive not active |
LED2 | Unidentified | N/A | N/A |
LED3 | Green | On | Drive power is on |
LED3 | Green | Off | Drive power is off |
Note: Function and color of LED2 is unidentified. | |||
My Books
