C4586NP Tape drive card Settings and Configuration
CONNOR PERIPHERALS, INC.
C4586NP
Device Type | Internal Removable Media Hard Drive |
Interface | SCSI-2 Fast |
Media | DAT MP+ |
Size | 5.25 in. third height |
View | Top |
DRIVE SELECTION | ||||
SCSI ID | SW1/1 | SW1/2 | SW1/3 | |
0 | Off | Off | Off | |
| » | 1 | Off | Off | On |
2 | Off | On | Off | |
3 | Off | On | On | |
4 | On | Off | Off | |
5 | On | Off | On | |
6 | On | On | Off | |
7 | On | On | On | |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | Media Recognition System disabled | SW1/4 | On |
| Media Recognition System enabled | SW1/4 | Off | |
Parity check enabled | SW1/5 | On | |
| » | Parity check disabled | SW1/5 | Off |
DDS Passthrough Mode enabled | SW1/6 | On | |
| » | DDS Passthrough Mode disabled | SW1/6 | Off |
Power-on Self-test enabled | SW1/8 | On | |
| » | Power-on Self-test disabled | SW1/8 | Off |
Note: When SW1/6 is off, then DDS-DC data compression is enabled. When SW1/6 is on, then DDS-DC data compression is disabled. | |||
TERMINATION POWER SELECTION |
Setting |
Note:TERMPWR supplied by drive |
MANUFACTURERS RECOMMENDED MEDIA | ||
Tape | Capacity Without Compression | Capacity With Compression |
60-m DAT | 1.3GB | 2.6GB |
90-m DAT | 2GB | 4GB |
120-m DAT MP+ | Unidentified | 4GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Cassette is in place |
LED1 | Green | Off | No cassette is in place |
LED2 | Green | On | A DDS-DC formatted tape is inserted in drive |
LED2 | Green | Off | A non-DDS-DC formatted tape is inserted |
LED3 | Green | On | Write protect on |
LED3 | Green | Off | Write protect off |
LED4 | Amber | On | DAT drive is reading/writing |
LED4 | Amber | Off | DAT drive is not in use |
My Books
