CTT8000R-S Tape drive card Settings and Configuration
CONNER PERIPHERALS, INC.
CTT8000R-S
Device Type | Tape Drive |
Interface | SCSI-2 |
Format | QIC-WIDE, Travan TR-4, Quarter Inch |
Sustained Transfer Rate | 600KBPS |
Size | 3.5 in. half height |
View | Bottom |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
Parity enabled | JP1/Pins 7 & 8 | Closed | |
Parity disabled | JP1/Pins 7 & 8 | Open | |
| » | Factory configured - do not alter. | JP1/Pins 9 & 10 | Unidentified |
| » | Factory configured - do not alter. | JP1/Pins 11 & 12 | Unidentified |
Active termination enabled | JP1/Pins 13 & 14 | Closed | |
Active termination disabled | JP1/Pins 13 & 14 | Open | |
DRIVE SELECT ID | |||
Drive ID | JP1/Pins 1 & 2 | JP1/Pins 3 & 4 | JP1/Pins 5 & 6 |
0 | Open | Open | Open |
1 | Open | Open | Closed |
2 | Open | Closed | Open |
3 | Open | Closed | Closed |
4 | Closed | Open | Open |
5 | Closed | Open | Closed |
6 | Closed | Closed | Open |
7 | Closed | Closed | Closed |
TERMINATION POWER SELECTION | ||
Setting | JP1/Pins 15 & 16 | |
| » | TERMPWR supplied by drive | Closed |
TERMPWR supplied by SCSI interface to drive | Open | |
MANUFACTURERS RECOMMENED MEDIA | ||
Tape | Capacity Without Compression | Capacity With Compression |
Travan 740 Ft. (Conner® 8000 TR4; 3M® Travan TR-4) | 4.0GB | 8.0GB |
Standard 900 Oe 400 Ft. (3M® miniMAGNUS 3080) | 1.6GB | 3.2GB |
QIC Wide 900 Oe 400 Ft. (Conner® 4000QT; Sony® QW3095XLF) | 2.0GB | 4.0GB |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Tape movement initiated |
LED1 | Green | Off | Tape not moving or tape not loaded |
Note: LED1 is lit when drive reads all but the beginning of the tape. | |||
My Books
