CDU-311 Optical drive card Settings and Configuration

SONY CORPORATION

CDU-311

Device Type
CD-ROM
Interface
ATAPI
Spin Rate
8x
Formats Supported
CD-Bridge, CD-Extra, CD-DA, CD-I, CD-I Ready, CD-ROM, CD-XA, Photo CD
View
Top

CONNECTIONS
Function
Label
Function
Label
Audio line out
CN1
Frame ground terminal
CN3
2-pin connector
CN2

ATAPI MASTER/SLAVE
Setting
JP1/1
JP1/2
JP1/3

Single drive only
Closed
Open
Open
»
Master in two drive system
Closed
Open
Open

Slave in two drive system
Open
Closed
Open

Master/Slave determined by Cable Select
Open
Open
Closed
Note: ‘Single drive’ refers tot the sole drive connected to an IDE interface (there may be up to two on a given system). Master & Slave refer to two drives connected to an interface.

Headaches Begone! A Systemic Approach To Healing Your Headaches

Don't Let Your Bike Seat Ruin Your Sex Life Book

CDU-311 Optical drive card Settings and Configuration

Search

My Books

Discover

Device Type	CD-ROM
Interface	ATAPI
Spin Rate	8x
Formats Supported	CD-Bridge, CD-Extra, CD-DA, CD-I, CD-I Ready, CD-ROM, CD-XA, Photo CD
View	Top

CONNECTIONS
Function	Label	Function	Label
Audio line out	CN1	Frame ground terminal	CN3
2-pin connector	CN2

ATAPI MASTER/SLAVE
Setting		JP1/1	JP1/2	JP1/3
	Single drive only	Closed	Open	Open
»	Master in two drive system	Closed	Open	Open
	Slave in two drive system	Open	Closed	Open
	Master/Slave determined by Cable Select	Open	Open	Closed
Note: ‘Single drive’ refers tot the sole drive connected to an IDE interface (there may be up to two on a given system). Master & Slave refer to two drives connected to an interface.