DE-UH7101 Optical drive card Settings and Configuration
PIONEER ELECTRONICS, INC.
DE-UH7101
Device Type | CD-WORM (Write Once Read Many) |
Interface | SCSI-2 |
Size | 5.25 in. half height |
Spin Rate | 4x |
Formats Supported | Unidentified |
View | Top |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
| » | Parity check enabled | JP1/jumper 4 | Open |
Parity check disabled | JP1/jumper 4 | Closed | |
| » | Eject function starts 10ms after pressing eject button | JP1/jumper 5 | Open |
Eject function starts 5 seconds after pressing eject button | JP1/jumper 5 | Closed | |
| » | Unit Attention enabled | JP1/jumper 6 | Open |
Unit Attention disabled | JP1/jumper 6 | Closed | |
DRIVE SELECT ID | ||||
Drive ID | JP1/jumper 1 | JP1/jumper 2 | JP1/jumper 3 | |
| » | 0 | Open | Open | Open |
1 | Closed | Open | Open | |
2 | Open | Closed | Open | |
3 | Closed | Closed | Open | |
4 | Open | Open | Closed | |
5 | Closed | Open | Closed | |
6 | Open | Closed | Closed | |
7 | Closed | Closed | Closed | |
MODE SELECTION | |||
Mode description | Mode ID | JP7 | JP8 |
Rewritable | 0 | Open | Open |
WORM | 1 | Closed | Open |
SCSI-2 | 2 | Open | Closed |
Proprietary rewritable | 3 | Closed | Closed |
MISCELLANEOUS TECHNICAL NOTES |
Two terminating resistors are installed at the bottom of the drive. To disable termination - remove resistors. |
My Books
