LAN10FL-AT Network Card Settings and Configuration
ZENITH DATA SYSTEMS
LAN10FL-AT
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 16-bit ISA |
Topology | Linear Bus |
Wiring Type | 200µ fiber optic cable |
Boot ROM | Available |
CONNECTIONS | |
Purpose | Location |
SMA 905 Receive Connector (gray) | CN1 |
SMA 905 Transmit Connector (black) | CN2 |
BASE MEMORY ADDRESS | |
Address | JP1 |
CC00h | Closed |
D000h | Open |
INTERRUPT REQUEST | |
IRQ | JP2 |
5 | Closed |
10 | Open |
ROM ENABLE | ||
Setting | JP3 | |
» | Disabled | Open |
| Enabled (at address D800h) | Closed |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
1 | On | Data is being received |
1 | Off | Data is not being received |
2 | On | Data is being transmitted |
2 | Off | Data is not being transmitted |
3 | On | Network connection is good |
3 | Off | Network connection is broken |
4 | On | Collision detected on the network |
4 | Off | The network is free of collisions |
My Books
