LanCard E/II Network Card Settings and Configuration
TIARA COMPUTER SYSTEMS, INC.
LanCard E/II
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | MCA |
Topology | Linear Bus |
Wiring Type | RG-58A/U 50ohm coaxial AUI transceiver via DB-15 port |
Boot ROM | Available |
CABLE TYPE | |
Type | JP1 - JP7 |
RG58A/U 50ohm coaxial | Pins 1 & 2 closed |
AUI transceiver via DB-15 port | Pins 2 & 3 closed |
CABLE LENGTH | ||
Segment Length | Max # of Nodes per Segment | JP8 |
984 feet | 100 | Pins 1 & 2 closed |
607 feet | 30 | Pins 2 & 3 closed |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
L1 | On | Power on |
L1 | Off | Power off |
L2 | Blinking | Data is being transmitted/received |
L2 | On | Card is transmittting continuously (jabber) |
Note:LED L1 will remain off if cable type is RG58A/U 50ohm coaxial. | ||
My Books
