ETHERCARD PLUS ELITE16, ETHERCARD PLUS ELITE16T, ETHERCARD PLUS ELITE16 COMBO Network Card Settings and Configuration
STANDARD MICROSYSTEMS CORPORATION
ETHERCARD PLUS ELITE16, ETHERCARD PLUS ELITE16T, ETHERCARD PLUS ELITE16 COMBO
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 16-bit ISA |
Topology | Linear Bus Star |
Wiring Type | Unshielded twisted pair (Elite16/Elite16T) RG-58A/U 50ohm coaxial (Elite16/Elite16 Combo) AUI transceiver via DB-15 port |
Boot ROM | Available |
NETWORK CARD CONFIGURATION | ||||||
Address | IRQ | Base Address | W1A | W1B | W1C | |
| » | 280h | 3 | D0000h | Open | Closed | Open |
300h | 10 | CC000h | Open | Open | Closed | |
Software select | Software select | Software select | Closed | Open | Open | |
BOOT ROM ADDRESS | |||
Address | W2A | W2B | |
| » | Software select/None | Closed | Open |
D8000h | Open | Closed | |
DIAGNOSTIC LED(S) | ||
LED | Status | Condition |
LED1 | On | Data is being transmitted |
LED1 | Off | Data is not being transmitted |
LED2 | On | Data is being received |
LED2 | On | Data is not being received |
LED3 | On | Receive wire polarity reversed and corrected |
LED3 | Off | Normal operation |
LED4 | On | Twisted pair network connection is good |
LED4 | Off | Twisted pair network connection is broken |
Note:LED3 and LED4 are on the Elite 16T and Elite 16 Combo only | ||
My Books
