ARCNET PS310 Network Card Settings and Configuration
STANDARD MICROSYSTEMS CORPORATION
ARCNET PS310
NIC Type | ARCnet |
Transfer Rate | 2.5Mbps |
Data Bus | 16-bit MCA |
Topology | Star Linear Bus |
Wiring Type | Unshielded twisted pair RG-62A/U 93ohm coaxial |
Boot ROM | Available |
TOPOLOGY SELECT | ||
Topology | JP2 | |
| » | Star | Pins 1 & 2 closed |
Linear Bus | Pins 2 & 3 closed | |
CABLE TYPE | ||
Type | JP3 | |
| » | RG-62A/U 93ohm coaxial | Pins 1 & 2 closed |
Unshielded twisted pair | Pins 2 & 3 closed | |
Note:If the topology is star and the cable type is unshielded twisted pair, the card is self-terminating.
| ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Red | On | Card is being accessed by host computer |
LED1 | Red | Off | Card is not being accessed by host computer |
LED2 | Green | On (Flickering) | Normal operation |
LED2 | Green | Off | Card is malfuntioning or node I/D is set to zero |
LED2 | Green | Blinking | Card is reconfiguring |
My Books
