PDI508PLUS-T Network Card Settings and Configuration
PURE DATA LTD.
PDI508PLUS-T
NIC Type | ARCnet |
Transfer Rate | 2.5Mbps |
Data Bus | 8-bit ISA |
Topology | Linear Bus |
Wiring Type | Shielded/Unshielded twisted pair |
Boot ROM | Available |
CONFIGURATION MEMORY CLEAR | ||
Setting | JP1 | |
| » | Normal operation | Open |
Clear memory | Closed | |
Note: When JP1 is closed all card addresses and settings are cleared from memory. | ||
INTERRUPT REQUEST | ||||
IRQ | JP2A | JP2B | JP2C | |
| » | 5 | Closed | Open | Open |
6 | Open | Closed | Open | |
7 | Open | Open | Closed | |
TIMEOUT CONFIGURATION | ||||
Response Time | Reconfiguration Time | JP3 | JP4 | |
| » | 74.7µs | 840µs | Open | Open |
283.4µs | 1680µs | Open | Closed | |
561.8µs | 1680µs | Closed | Open | |
| 1118.6µs | 1680µs | Closed | Closed | |
CARDS INSTALLED | |||||
Card number | JP5A | JP5B | JP5C | JP5D | |
| » | 1 | Open | Open | Open | Closed |
2 | Open | Open | Closed | Open | |
3 | Open | Closed | Open | Open | |
4 | Closed | Open | Open | Open | |
Note:If there is only one NIC installed in a system, set this option to the "1" position. If this NIC is the second
| |||||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Red | On/Blinking | I/O bus activity detected |
LED1 | Red | Off | No I/O bus activity detected |
LED2 | Green | On | Network activity detected |
LED2 | Green | Off | No network activity detected or bad connection |
MISCELLANEOUS NOTES |
Software that is supplied with the card must be run in order to fully configure the card. |
My Books
