PDI508PLUS-H Network Card Settings and Configuration
PURE DATA LTD.
PDI508PLUS-H
NIC Type | ARCnet |
Transfer Rate | 2.5Mbps |
Data Bus | 8-bit ISA |
Topology | Linear Bus |
Wiring Type | RG-62A/U 93ohm coaxial |
Boot ROM | Available |
CONFIGURATION MEMORY | |
Setting | JP1 |
Configuration memory normal operation | Open |
Configuration memory clear (reset card parameters) | Closed |
INTERRUPT REQUEST | ||||
IRQ | JP2A | JP2B | JP2C | |
| » | 5 | Closed | Open | Open |
6 | Open | Closed | Open | |
7 | Open | Open | Closed | |
TIMEOUT CONFIGURATION | ||||
Response Time | Reconfiguration Time | JP3 | JP4 | |
| » | 74.7µs | 840µs | Open | Open |
283.4µs | 1680µs | Open | Closed | |
561.8µs | 1680µs | Closed | Open | |
| 1118.6µs | 1680µs | Closed | Closed | |
CARDS INSTALLED | |||||
Card number | JP5A | JP5B | JP5C | JP5D | |
| » | 1 | Open | Open | Open | Closed |
2 | Open | Open | Closed | Open | |
3 | Open | Closed | Open | Open | |
4 | Closed | Open | Open | Open | |
Note:If there is only one NIC installed in a system, set this option to the "1" position. If this NIC is the second card to be installed in the system, set this option to the "2" position, and so on.
| |||||
DIAGNOSTIC LED(S) | ||
Color | Status | Condition |
Red | On/Blinking | I/O bus activity detected |
Red | Off | No I/O bus activity detected |
Green | On | Network activity detected |
Green | Off | No network activity detected |
MISCELLANEOUS NOTES |
Software that is supplied with the card must be run in order to fully configure the card. |
My Books
