RANGELAN2 7510, RANGELAN2 752X Network Card Settings and Configuration

NIC Type	Proprietary Wireless Ethernet
Maximum Onboard Memory	Unidentified
Boot ROM	Unidentified
Network Transfer Rate	1.6Mbps (RangeLAN2)/10Mbps (Ethernet)
Topology	Linear Bus, Star
Wiring Type	Shielded twisted pair Unshielded twisted pair RG-58A/U 50ohm coaxial
Data Bus	External device

CONNECTIONS
Function	Label	Function	Label
Antenna connector	CN1	UTP via RJ-45 connector	CN4
DB-9 serial connector	CN2	DC power jack	CN5
10Base2 via BNC connector	CN3

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Yellow/Green	Blinking	Data is being transmitted/received
LED1	Yellow/Red	Blinking	Hardware problem
LED2	Yellow	Blinking	Data is being transmitted wirelessly
LED2	Yellow	Off	Data is not being transmitted wirelessly
LED3	Green	Blinking	Data is being transmitted over Ethernet
LED3	Green	Off	Data is not being transmitted over Ethernet
LED4	Green	On	Device is master
LED4	Green	Off	Device is not master
LED5	Unidentified	On	Access Point configured as a Station synchronized to a Master
LED5	Unidentified	Off	Access Point configured as a Station not synchronized to a Master
LED6	Green	On	UTP link (10BASE-T) is good
LED6	Green	Off	UTP link (10BASE-T) is broken or 10BASE2 cable used