ISA HUBEXPANDER Network Card Settings and Configuration
NETWORTH, INC.
ISA HUBEXPANDER
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 8/16-bit ISA |
Topology | Star |
Wiring Type | Unshielded twisted pair (located on external box) |
Boot ROM | Not available |
CONNECTIONS | |
Purpose | Location |
Daisy-chain cable from another board connector | S1 |
Physical Media Extender board connector | S2 |
Daisy-chain cable for this board connector | S3 |
Proprietary Telco 50-pin connector | S4 |
EXPANSION CARD CONFIGURATION | |
Select | W2 |
HubCard | pins 1 & 2 closed |
HubExpander 1 | pins 3 & 4 closed |
HubExpander 2 | pins 5 & 6 closed |
HubExpander 3 | pins 7 & 8 closed |
FACTORY CONFIGURED - DO NOT ALTER | |
Jumper | Position |
W1 | Closed |
MISCELLANEOUS NOTES |
Terminator pack must be placed on last hubexpander card in chain. |
My Books
