MEGANET MASTER BOARD Network Card Settings and Configuration

NIC Type	Device Network Architecture (DNA)
Transfer Rate	10Mbps
Data Bus	8-bit ISA
Topology	Linear bus
Wiring Type	Shielded twisted pair Unshielded twisted pair (2 male DB-9 connectors)
Boot ROM	Not available

I/O BASE ADDRESS
Address		JP1A	JP1B	JP1C
»	2E0h	Open	Open	Open
	2E2h	Open	Open	Closed
	2E4h	Open	Closed	Open
	2E6h	Open	Closed	Closed
	2E8h	Closed	Open	Open
	2EAh	Closed	Open	Closed
	2ECh	Closed	Closed	Open
	2EEh	Closed	Closed	Closed

INTERRUPT REQUEST
IRQ		JP2A	JP2B	JP2C	JP2D
	2	Closed	Open	Open	Open
	3	Open	Closed	Open	Open
	4	Open	Open	Closed	Open
»	5	Open	Open	Open	Closed
	Disabled	Pins one of JP2A & JP2B closed

SLOT EIGHT ENABLE
Setting		JP8
»	Disabled	Closed
	Enabled	Open
Note:If the card is installed in slot 8 of an IBM XT or compatible this option must be enabled.