LCS-8836 Network Card Settings and Configuration

NIC Type	Token Ring
Transfer Rate	4/16 Mbps
Data Bus	8-bit ISA
Topology	Ring
Wiring Type	AUI transceiver via DB-15 port Unshielded twisted pair
Boot ROM	Available

BASE MEMORY ADDRESS SELECT
Address		SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
»	CC000h	Off	On	On	Off	Off	Off
	C0000h	Off	On	On	On	On	On
	C2000h	Off	On	On	On	On	Off
	C4000h	Off	On	On	On	Off	On
	C6000h	Off	On	On	On	Off	Off
	C8000h	Off	On	On	Off	On	On
	CA000h	Off	On	On	Off	On	Off
	CE000h	Off	On	On	Off	Off	Off
	D0000h	Off	On	Off	On	On	On
	D2000h	Off	On	Off	On	On	Off
	D4000h	Off	On	Off	On	Off	On
	D6000h	Off	On	Off	On	Off	Off
	D8000h	Off	On	Off	Off	On	On
	DA000h	Off	On	Off	Off	On	Off
	DC000h	Off	On	Off	Off	Off	On
	DE000h	Off	On	Off	Off	Off	Off
Note: The address range for the LCS-8836 is C0000 - DFFFFh. These addresses are provided as examples.

INTERRUPT SELECT
IRQ		SW1/7	SW1/8
»	IRQ2	On	On
	IRQ3	On	Off
	IRQ6	Off	On
	IRQ7	Off	Off

PRIMARY/ALTERNATE ADAPTER SELECT
Setting	SW1/9
Primary	Off
Alternate	On
Note:Up to two LCS 8836 adapters may be used in a single system, so long as they do not share the same SW1/9 designation.

SHARED RAM
Size		SW1/10	SW1/11
»	16KB	Off	On
	8KB	On	On
	32KB	On	Off
	64KB	Off	Off

DATA RATE
Rate		SW1/12
»	16Mbps	Off
	4Mbps	On

CABLE TYPE
Type	JP3	JP4
AUI transceiver via DB-15 port	Open	Open
Unshielded twisted pair	Closed	Closed