ICECARD-1 Network Card Settings and Configuration

NIC Type	ARCnet
Network Transfer Rate	4Mbps
Data Bus	8-bit ISA
Topology	Linear Bus, Star, Ring, Peer-Peer
Wiring Type	RG-62A/U 93ohm coaxial
Boot ROM	Available

CONNECTIONS
Function	Label
RG-62A/U 93ohm coaxial port	CN1

BASE I/O ADDRESS SELECTION
Address	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5	SW1/6
220h	Off	On	On	On	On	On
210h	Off	On	On	On	On	Off
220h	Off	On	On	On	Off	On
230h	Off	On	On	On	Off	Off
240h	Off	On	On	Off	On	On
250h	Off	On	On	Off	On	Off
3Aoh	Off	Off	Off	On	On	On
3B0h	Off	Off	Off	On	Off	Off
3C0h	Off	Off	Off	Off	On	On
3D0h	Off	Off	Off	Off	On	Off
3E0h	Off	Off	Off	Off	Off	On
3F0h	Off	Off	Off	Off	Off	Off

INTERRUPT SELECTION
IRQ	SW2/1	SW2/2	SW2/3	SW2/4	SW2/5
2	Off	Off	Off	Off	On
3	Off	Off	Off	On	Off
4	Off	Off	On	Off	Off
5	Off	On	Off	Off	Off
7	On	Off	Off	Off	Off

RAM BUFFER ADDRESS SELECTION
Address	SW1/7	SW1/8	SW2/6	SW2/7	SW2/8
A0000-A3FFFh	On	On	On	Off	On
AC000-AFFFFh	Off	On	On	Off	On
A8000-ABFFFh	On	Off	On	Off	On
A8000-ABFFFh	Off	Off	On	Off	On
E0000-E3FFFh	On	On	Off	Off	On
EC000-EFFFFh	Off	On	Off	Off	On
E8000-EBFFFh	On	Off	Off	Off	On
E8000-EBFFFh	Off	Off	Off	Off	On

MISCELLANEOUS TECHNICAL NOTES

Note: The purposes of LED1 and LED2 are unidentified