ETHERNIC/8 Network Card Settings and Configuration
IMC NETWORK CORPORATION
ETHERNIC/8
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 8-bit ISA |
Topology | Linear Bus |
Wiring Type | RG--58A/U 50ohm coaxial AUI transceiver via DB-15 port |
Boot ROM | Available |
I/O BASE ADDRESS | |||
Address | JP1A | JP1B | |
| » | 360h | Closed | Open |
368h | Open | Closed | |
INTERRUPT REQUEST | |||||
IRQ | JP2A | JP2B | JP2C | JP2D | |
2 | Open | Closed | Open | Open | |
3 | Open | Open | Open | Closed | |
| » | 4 | Closed | Open | Open | Open |
| » | 5 | Open | Open | Closed | Open |
Note:Two IRQ can be selected at a time. This allows the card's network shell driver to be configured using either IRQ without changing jumpers on the card.
| |||||
BOOT ROM ADDRESS & SHARED MEMORY ADDRESS | ||||||
Boot ROM | Shared Memory | JP3A | JP3B | JP3C | JP3D | |
| » | Disabled | Software select | Open | Open | Open | Closed |
D8000h | D0000h | Open | Open | Closed | Open | |
E0000h | E8000h | Open | Closed | Open | Open | |
E8000h | E0000h | Closed | Open | Open | Open | |
CABLE TYPE | ||
Type | JP4A - JP4F | |
| » | RG--58A/U 50ohm coaxial | Pins 1 & 2 Closed |
AUI transceiver via DB-15 port | Pins 2 & 3 Closed | |
My Books
