PCI TOKEN RING ADAPTER Network Card Settings and Configuration
IBM CORPORATION
PCI TOKEN RING ADAPTER
PCI WAKE ON LAN TOKEN-RING ADAPTER,
Card Type | Network Interface card |
NIC Type | Token Ring |
Boot ROM | Unavailable |
Network Transfer Rate | 16/4Mbps |
Topology | Star |
Wire Type | Unshielded twisted pair Shielded twisted pair |
Data Bus | 32-bit PCI |
CONNECTIONS | |||
Function | Label | Function | Label |
9-pin serial port | CN1 | RJ-45 UTP connector | CN2 |
DIAGNOSTIC LED(S) | ||
LED 1 (Amber) | LED 2 (Green) | Condition |
Blinking | Blinking | Adapter is active and awaits initialization |
Off | Off | Power is off or initialization is in progress |
Off | Blinking | Self diagnosis detected no problems, waiting to open |
Off | On | The adapter is open and operational |
On | Off | Self diagnosis failed. A problem exists |
Blinking | Off | Adapter is closed. A problem exists |
Blinking | On | Adapter has detected beaconing or a hard error |
On | On | Adapter has failed before self-diagnostic test. |
My Books
