MAGNUM TP1A Network Card Settings and Configuration
GARRETT COMMUNICATIONS
MAGNUM TP1A
Card Type | Ethernet Transceiver |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus, star |
Wiring Type | Unshielded twisted pair, Shielded twisted pair AUI transceiver via DB-15 port |
Data Bus | External |
CONNECTIONS | |||
Function | Label | Function | Label |
AUI transceiver via DB-15 | CN1 | UTP connector (RJ-45) | CN2 |
USER CONFIGURABLE SETTINGS | |||
Function | Label | Position | |
| » | SQE enabled | SW1 | On |
SQE disabled | SW1 | Off | |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
LED1 | Green | On | Power is on |
LED1 | Green | Off | Power is off |
LED2 | Green | On | Network connection established |
LED2 | Green | Off | Network connection is not established |
LED3 | Yellow | On | Data is being transmitted |
LED3 | Yellow | Off | Data is not being transmitted |
LED4 | Yellow | On | Data is being received |
LED4 | Yellow | Off | Data is not being received |
MISCELLANEOUS TECHNICAL NOTES |
The AUI port should be directly connected to the workstation. If you cannot connect directly to the workstation, an AUI drop cable (which cannot exceed 3 feet in length) may be used. |
My Books
