DAYNAPORT E/Z Network Card Settings and Configuration
DAYNA COMMUNICATIONS, INC.
DAYNAPORT E/Z
Card Type | Network Interface Card |
NIC Type | Ethernet |
Maximum Onboard Memory | Unidentified |
Boot ROM | Not available |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus, Star |
Wiring Type | Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Data Bus | Serial |
CONNECTIONS | |||
Function | Label | Function | Label |
LocalTalk serial port | CN1 | BNC connector | CN4 |
RJ-45 connector | CN2 | DC Power connector | CN5 |
AUI transceiver via DB-15 | CN3 | ||
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
Power | Green | On | Power is on |
Power | Green | Off | Power is off |
Activity | Yellow | On | Data is being transmitted/received |
Activity | Yellow | Off | Data is not being transmitted/received |
Link status | Unidentified | On | UTP link is good |
Link status | Unidentified | Off | UTP link is broken |
MISCELLANEOUS TECHNICAL NOTES |
Never connect or disconnect the SCSI/Link when it is powered on. |
My Books
