TR-3016 Network Card Settings and Configuration

NIC Type	Token-Ring
Transfer Rate	4/16Mbps
Data Bus	8-bit ISA
Topology	Ring
Wiring Type	Unshielded twisted pair Shielded twisted pair (DB-9 port)
Boot ROM	Available

CABLE TYPE
Type		JP3A - C
»	Shielded twisted pair (DB-9 port)	Pins 1 & 2 closed
	Unshielded twisted pair	Pins 2 & 3 closed

INTERRUPT REQUEST
IRQ		SW1/7	SW1/8
»	2	On	On
	3	On	Off
	7	Off	Off

PRIMARY/ALTERNATE CARD
Setting		SW1/9
»	Primary	Open
	Alternate	Closed
Note:If two cards are to be used in a single system, one of the cards must be set to primary and the other one must be set to alternate

BOOT ROM ADDRESS
Address	SW1/1	SW1/2	SW1/3	SW1/4	SW1/5
A0000h	On	Off	On	On	On
A4000h	On	Off	On	On	Off
A8000h	On	Off	On	Off	On
AC000h	On	Off	On	Off	Off
B0000h	On	Off	Off	On	On
B4000h	On	Off	Off	On	Off
B8000h	On	Off	Off	Off	On
BC000h	On	Off	Off	Off	Off
C0000h	Off	On	On	On	On
C4000h	Off	On	On	On	Off
C8000h	Off	On	On	Off	On
CC000h	Off	On	On	Off	Off
D0000h	Off	On	Off	On	On
D4000h	Off	On	Off	On	Off
D8000h	Off	On	Off	Off	On
DC000h	Off	On	Off	Off	Off
E0000h	Off	Off	On	On	On
E4000h	Off	Off	On	On	Off
E8000h	Off	Off	On	Off	On
EC000h	Off	Off	On	Off	Off
F0000h	Off	Off	Off	On	On

BOOT ROM
Setting		SW1/6
»	Disabled	Off
	Enabled	On

SHARED RAM SIZE
Size		SW1/10	SW1/11
	8KB	On	On
»	16KB	Off	On
	32KB	On	Off
	64KB	Off	Off

NETWORK SEGMENT SPEED
Speed		SW1/12
»	16Mbps	Off
	4Mbps	On
Note:All cards on the network segment must have this option set identically.