DANPEX CORPORATION
ET-509
Card Type | Translator |
NIC Type | Ethernet |
Network Transfer Rate | 10Mbps |
Topology | Linear Bus/Star |
Wiring Type | Unshielded twisted pair RG-58A/U 50ohm coaxial |
CONNECTIONS | |||
Function | Label | Function | Label |
RG-58A/U 50ohm coaxial connector | CN1 | DC power in | CN3 |
Unshielded twisted pair connector | CN2 |
USER CONFIGURABLE SETTINGS | |||
Setting | Label | Position | |
» | SQE test disabled | JP1 | Pins 2 & 3 closed |
SQE test enabled | JP1 | Pins 1 & 2 closed |
DIAGNOSTIC LED(S) | |||
LED | Color | Status | Condition |
P/U | Unidentified | Blinking | Power is on and transceiver is transmitting to or receiving from the unshielded twisted pair connector |
P/U | Unidentified | Off | Power is off or transceiver is not transmitting to or receiving from the unshielded twisted pair connector |
LNK | Unidentified | On | Network connection is good |
LNK | Unidentified | Off | Network connection is broken |
COL | Unidentified | On | Coaxial connector improperly terminated |
COL | Unidentified | Off | Collision has not been detected |
COL | Unidentified | Blinking | Collision has been detected |
BNC | Unidentified | Blinking | Transceiver is transmitting to or receiving from the coaxial connector |
BNC | Unidentified | Off | Transceiver is not transmitting to or receiving from the coaxial connector |
Note:The exact locations of each LED are unidentified. |